Rahsi™ Signal–Enforcement Boundary (SEB™)
Why Device Compliance Is a Signal and Conditional Access Is the Gate
Most tenants treat device compliance like policy hygiene.
That’s the mistake.
In modern identity-first security, device compliance is a signal and Conditional Access is the gate. If you don’t wire those two together cleanly, you’re not “managing endpoints”—you’re letting unknown posture drift into your data plane.
This is the Rahsi™ Signal–Enforcement Boundary (SEB™):
Intune Compliance = Signal → Microsoft Entra Conditional Access = Enforcement Gate
When SEB™ is built correctly, a device that drifts (outdated OS, rooted/jailbroken, encryption off, lost contact, risky threat level) doesn’t “become a ticket.”
It becomes noncompliant, and the gate closes automatically.
The SEB™ Mental Model (Simple, Brutal, Effective)
1) Define the Signal
Signals are device facts you can trust because they’re evaluated continuously:
- Minimum OS version
- Maximum OS version
- Encryption state
- Jailbreak/root detection
- PIN/password posture
- Threat level (when integrated with a threat defense partner)
- Custom compliance (where built-in settings don’t cover your requirement)
Signal rule: If it can’t be measured consistently, it can’t be enforced safely.
2) Define the Enforcement
Intune can mark a device noncompliant and run actions.
But the real gate is Entra Conditional Access:
When Access Controls include “Require device to be marked as compliant”, noncompliant devices are blocked from corporate resources.
That’s the boundary.
Intune Compliance Has Two Layers (And Both Matter)
Microsoft Intune compliance is split into:
1) Compliance policy settings (tenant-wide)
2) Device compliance policies (per-platform rules you deploy)
That separation is where many environments quietly fail.
Layer 1: Compliance Policy Settings (Tenant-Wide “Default Physics”)
Go to: Endpoint security → Device compliance → Compliance policy settings
Mark devices with no compliance policy assigned as
This decides what happens to devices that don’t receive a compliance policy.
- Compliant (default) = security feature OFF Devices with no compliance policy are treated as compliant.
- Not compliant = security feature ON Devices with no compliance policy are treated as noncompliant.
SEB™ recommendation: If you use Conditional Access, set it to Not compliant.
Otherwise, “no policy assigned” becomes an unintended bypass lane.
Compliance status validity period (days)
This defines how long a device can go without successfully reporting compliance.
- Default: 30 days
- Configurable: 1–120 days
- If the device doesn’t report within the validity period, it’s treated as noncompliant.
SEB™ recommendation: Treat “lost contact” as a security state, not an admin inconvenience. If a device can’t report, you can’t trust posture.
Layer 2: Device Compliance Policies (Per Platform “Rules of Entry”)
These are the actual rules devices must meet to be compliant.
Use compliance policies to:
- Define platform-specific requirements (OS version, encryption, jailbreak/root, threat level)
- Trigger actions for noncompliance
- Feed compliance state into Conditional Access
Important reality: Compliance evaluation depends on device check-in and refresh cycles. Your enforcement works at the speed of your device fleet’s reality.
Actions for Noncompliance (SEB™ Escalation Ladder)
Every compliance policy includes: mark device noncompliant.
You can add more actions, often used as an escalation ladder, like:
- Send email notifications (immediate and repeated)
- Remotely lock after a time window
- Retire after a time window (admin must then explicitly retire)
SEB™ principle: Don’t jump straight to destruction.
Build an escalation ladder that is:
1) Fast signal → 2) Visible to user → 3) Enforced by gate → 4) Cleaned up if ignored
Conditional Access: Where SEB™ Becomes Real
When a device enrolls in Intune, it registers in Microsoft Entra ID.
Intune reports compliance status to Entra.
In Conditional Access, set Access controls:
✅ Require device to be marked as compliant
That’s the enforcement gate.
SEB™ warning: If you keep “Mark devices with no compliance policy assigned as = Compliant”, you may accidentally allow devices that never received a compliance policy to pass the gate.
“Quarantined vs Remediated” (What the OS Will Actually Enforce)
Some compliance settings are Remediated by the OS (user is forced to fix it, like setting a PIN in some platforms).
Others are Quarantined (OS won’t force it; the device remains noncompliant, and Conditional Access blocks access).
SEB™ takeaway: You cannot assume the device will self-heal.
For quarantined settings, the gate is the control.
Monitor Compliance Like It’s a Security Dashboard (Because It Is)
Intune includes a device compliance dashboard to monitor:
- Device compliance posture
- Policy compliance
- Drill-down by policy and device
SEB™ metric mindset:
- Compliance % is not a vanity metric.
- It’s the measurable health of your enforcement boundary.
SEB™ Implementation Blueprint (Fast Start)
If you want the shortest path to a tenant-safe SEB™:
1) Set “Mark devices with no compliance policy assigned as” → Not compliant
2) Configure Compliance status validity period to match your risk tolerance
3) Create per-platform Device compliance policies (Windows, macOS, iOS, Android, Linux as required)
4) Add actions for noncompliance (notify → lock → retire ladder)
5) Build Entra Conditional Access policies that Require compliant device for key cloud apps
6) Monitor compliance dashboards and treat drift as security work, not helpdesk work
Why SEB™ Matters When the World Is On Fire
When exploit waves and attack chains move faster than human change control, SEB™ is how you prevent “unknown posture devices” from accessing corporate resources.
Not by panic.
By architecture.
Because in a modern tenant:
Compliance is the signal.
Conditional Access is the gate.
SEB™ is the boundary.
Read Complete Article | https://www.aakashrahsi.online/post/rahsi-signalenforcement-boundary
Top comments (0)